English
Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
معالجة الأخطاء المضخة الهيدروليكية الإفراط في الحرارة وفقدان التدفق في كوماتسو PC1250 الحفارات
A technical guide on diagnosing low hydraulic pressure, oil overheating, and swashplate response delay in Komatsu PC1250-7 and PC1100-6 main hydraulic pumps.
مضخة هيدروليكية رئيسية لكوماتسو PC1100 و PC1250 (سلسلة 708-2H / 708-2L): الاختيار، المرجع المتقاطع وتحليل الأعطال
Engineering guide covering application scenarios, part cross-referencing (708-2H-00322, 708-2L-00522), and root-cause failure analysis for Komatsu PC1100-6 and PC1250-7 main hydraulic pumps.
لماذا تبلى المضخة الهيدروليكية بسرعة بعد الاستبدال؟
Replacement excavator hydraulic pumps often fail prematurely because contamination, incorrect installation, poor oil/filter condition, system pressure or heat issues, and other hydraulic component problems remain unresolved. Proper cleaning, inspection, installation, and commissioning are essential to prevent repeated pump failures.
المضخة الهيدروليكية للحفارة مقابل صمام التحكم الرئيسي: كيفية تحديد المشكلة الحقيقية؟
This blog explains how to distinguish between excavator hydraulic pump and main control valve problems by comparing symptoms, such as whether all functions or only specific circuits are affected. It also outlines a systematic diagnostic procedure involving oil checks, filters, pressure testing, function comparison, and valve inspection.
مضخات هيدروليكية من سلسلة REXROTH (UCHIDA) AP2D للحفارات
This guide covers the Rexroth (Uchida) AP2D series of tandem variable-displacement hydraulic pumps for 1.2–8 tonne mini and compact excavators, including AP2D12 through AP2D36 models rated at 350 bar and 3500 rpm. It provides OEM application references, cross-reference codes, and buyer guidance for sourcing exact pumps, control variants, and spare parts.
ما الذي يسبب الضوضاء في المضخة الهيدروليكية للحفارة؟
This blog explains common causes of noise in an excavator hydraulic pump, including air ingestion, cavitation, low or contaminated oil, worn bearings, blocked filters, and incorrect oil selection. It also outlines symptoms and preventive maintenance steps to reduce downtime and extend pump life.
كيف يقتل زيتك الهيدروليكي بصمت محركك النهائي للحفارة
This blog explains how contaminated, degraded, or water-aerated hydraulic oil from the machine's shared system can silently damage an excavator final drive travel motor through abrasive wear, lubrication loss, and cavitation. It emphasizes cascading failures and recommends filter changes, oil sampling, flushing, and root-cause repair before replacing a final drive.
